TL;DR: RK3568 HDMI 2.0 Query Board for Clinic Reception
AndroidSBC release: twelve-model WF-K self-service query terminal motherboard family opens for volume orders serving Copenhagen, Denmark. The WF-K3601 self-service query terminal Android motherboard spans the single-screen touch query all-in-one terminal and eleven sister models in the WF-K series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, 1080p HDMI plus LVDS panel output, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Copenhagen and Denmark importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.
About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family
The self-service query terminal Android motherboard family from AndroidSBC is manufactured end to end by Wanlin Manufacturing Group in Longgang, Shenzhen. Eight silicon tiers and twelve models let Copenhagen integrators match cost to duty cycle, while the shared firmware baseline keeps field spares interchangeable across Denmark sites. The plant holds a standing allocation of LPDDR4X and eMMC for the WF-K line, which is how Copenhagen projects keep their lead times stable across quarters.
WF-K3601 Technical Specifications
| Parameter | AndroidSBC WF-K3601 (single-screen touch query all-in-one terminal) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | 1080p HDMI plus LVDS panel output | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 11 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Query peripherals | Capacitive touch, thermal printer, document scanner, card reader | No bundled touch, printer or scanner driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3601 (single-screen touch query all-in-one terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Denmark importers sourcing the WF-K family, the WF-K3601-A variant is the typical configuration for the hospital outpatient query rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Denmark Buyers
Sourcing a self-service query terminal board for Denmark is not only a chip question. A Copenhagen integrator has to align the touch stack, the printer and scanner drivers, the enclosure cut-outs and the compliance file set before a single unit reaches the field.
Finally, the arrival path shapes the plan. Hardware destined for Copenhagen clears through Port of Copenhagen, so the Energistyrelsen paperwork and the CE marking with the Danish Energy Agency radio notification route used in Denmark need to travel with the carton, not follow it. For Denmark buyers the effect is that a 16000-unit order for Copenhagen repeats identically the 5th time it is placed, down to the firmware revision.
Competitive Comparison: WF-K3601 vs Competing Self-Service Query Terminal Android Boards
Against the query boards usually quoted in Denmark, the WF-K board is positioned on integration completeness rather than on a single performance number for Copenhagen.
- Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
- Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.
Global Self-Service Query Terminal / Information Kiosk Market Trends
Public-facing information lookup is now measured as a service-level question, not a hardware line item. Denmark procurement increasingly specifies the single-screen touch query all-in-one terminal as part of a wider access programme, which pushes Copenhagen integrators towards boards that can be re-deployed across sites.
- Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3601 and WF-K1330 tiers ship in board form with the enclosure left to the local partner.
- Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K1330 and WF-K1331 configurations address that pattern directly.
- Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K1331 over boards that re-spin silicon between lots.
That trend favours board-level suppliers in Denmark: the Copenhagen buyer who can re-order the same part number two years later is the one who can keep an estate running.
Partner Success Story: Levant Access Services (government service hall contractor)
A Levant Access Services rollout in the GCC public service segment shows how the WF-K self-service query terminal family works in practice for Copenhagen integrators. Levant Access Services commissioned 16000 query terminals in government service halls.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Access Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus Energistyrelsen conformity, all bundled into the Shenzhen source-factory shipment.
As Levant Access Services Project Director for GCC Public Service put it: Levant Access Services required Arabic UI support and hall information screens from one platform, and the 16000 WF-K units commissioned in Copenhagen run both roles on the same firmware.
Field Report: outpatient self-service query rollout at a regional hospital group
PINGHU, Shenzhen, September 22, 2026 - Geng Yan, AndroidSBC field desk. The WF-K3601 lot was soak-tested with the hall display and the touch panel running from one board, the configuration most Denmark projects specify. The WF-K3601 self-service query terminal Android motherboard order for Copenhagen, Denmark cleared the burn-in station on schedule and is en route via the Copenhagen - Shanghai lane.
The WF-K3601 single-screen touch query all-in-one terminal production lot includes the WF-K3601-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Denmark integrators, the Energistyrelsen conformity plus CE marking with the Danish Energy Agency radio notification paperwork is bundled.
Filed by Geng Yan, AndroidSBC field desk, PINGHU, Shenzhen. Denmark integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.
WF-K3601 Application Scenarios
The WF-K3601 single-screen touch query all-in-one terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3601-A configuration is the typical build for the hospital outpatient query rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.
- Hospital and clinic information points: the WF-K3601 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Copenhagen.
- Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
- Government service halls: the WF-K6180 runs tax, social security and real estate information lookup, with printing available on the same board.
- Shopping mall directories: the WF-K5270 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
- Airport and train station concourses: high-brightness information query where the WF-K8800 has to stay readable under strong ambient light.
- Retail and pharmacy price or product lookup: compact stations where the WF-K8801 fits a narrow counter without structural work.
- Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
- Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
- Retrofit programmes in Copenhagen: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.
Partnership Models for Copenhagen Buyers
The partnership structure offered to Copenhagen buyers is deliberately flexible: Denmark integrators can take the board alone, take it with the driver stack, or take it as a private-label programme.
- Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
For Copenhagen integrators the choice usually comes down to how much of the Denmark project the local team wants to own versus how much it wants the factory to carry.
Frequently Asked Questions
Does the WF-K self-service query terminal Android motherboard family support a single-screen touch query all-in-one terminal?
Answer: Yes. AndroidSBC ships the single-screen touch query all-in-one terminal as a standard configuration, and the touch, printer and card reader drivers for it are integrated into the factory image rather than added by the Copenhagen integrator on site.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-K family?
Answer: The RK3568 tier differs in compute headroom, display capability and NPU availability rather than in board-level interfaces. All WF-K models share the same mounting pattern, the same peripheral pinout and the same firmware baseline, so a Denmark project can move between tiers without re-designing the enclosure.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Denmark?
Answer: Yes. AndroidSBC prepares the conformity file set for Denmark as part of the order, covering CE, FCC, RoHS and REACH as applicable, plus the destination-specific route. The documents travel with the Copenhagen shipment rather than following it.
What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?
Answer: AndroidSBC sets a pilot-friendly MOQ on the WF-K family. Sample units reach Copenhagen in 1-3 days, and a first bulk lot for Denmark runs 15-30 days from confirmation.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?
Answer: Yes, and the custom build is maintained as a branch rather than a one-off, so Copenhagen partners receive updates against their own image for as long as the Denmark programme runs.
How are software updates and long-term support handled on the WF-K family?
Answer: The WF-K family runs a staged OTA channel with rollback. Updates are released against the shared firmware baseline, and Copenhagen integrators can hold a Denmark estate on a known revision while a new build is validated.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?
Answer: Yes, and this is a standard route for Copenhagen sellers. AndroidSBC prepares FBA-compliant cartons and labels for Denmark warehouses as part of the shipment rather than as a separate service.
How are RMA and DOA replacements handled on the WF-K self-service query terminal family?
Answer: DOA and RMA cases are managed by lot, with replacement units supplied from a matching build so a Copenhagen partner does not end up with mixed firmware across a Denmark estate.
Contact AndroidSBC: Start Your WF-K3601 Sourcing Conversation
To start a WF-K self-service query terminal Android motherboard sourcing conversation with AndroidSBC, Copenhagen integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Copenhagen and Denmark buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
