TL;DR: POS Motherboard MIPI Camera Interface for Convenience Store Counter
AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Copenhagen, Denmark. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Copenhagen and Denmark importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC, a Wanlin Manufacturing Group export brand, treats the POS board as the long-lived part of the terminal, not the disposable one. The WF-P family is specified for a seven-year firmware window and 7x24 counter duty, and each lot ships with the receipt printer, barcode scanner, cash drawer and payment reader drivers already validated against the target Android build. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Copenhagen integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P3399 Technical Specifications
| Parameter | AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) | Industry Average |
|---|---|---|
| Processor | RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-T860 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | none | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 plus eDP output at 4K@60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 11 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Denmark importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Denmark Buyers
And there is the long tail: the board has to survive a firmware update pushed to four hundred lanes at once, roll back cleanly if the update fails, and keep the drawer and printer working through both.
On lead time the answer is allocation. LPDDR4X and eMMC parts are bought against a rolling forecast for the WF-P family, so a Copenhagen partner on a call-off schedule gets a date that holds instead of a quote that expires. 42000 WF-P boards cleared final test on September 23, 2026 for Copenhagen, booked on the Copenhagen - Shanghai lane. The country compliance note for Denmark sat in the shipment folder alongside the peripheral validation report.
Competitive Comparison: WF-P3399 vs Competing POS Android Boards
Competing boards reaching Copenhagen usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Two forces drive the Denmark POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.
- Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P7600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P7601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
For Copenhagen buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.
Partner Success Story: Levant Checkout Services (forecourt payment integrator)
A Levant Checkout Services programme in the GCC fuel and convenience segment illustrates how the WF-P family from AndroidSBC supports Copenhagen integrators on the ground. Levant Checkout Services rolled out 42000 WF-P boards across 58 forecourt payment cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Checkout Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus Energistyrelsen conformity, all bundled into the Shenzhen source-factory shipment.
Levant Checkout Services Project Director for GCC Fuel and Convenience highlighted: Levant Checkout Services runs unattended forecourt cabinets on the industrial WF-P tier, and 42000 units hold a 24-hour duty cycle across the Copenhagen network.
Field Report: flagship store checkout and media wall installation
YANTIAN, September 23, 2026 - Man Qing, AndroidSBC field desk. What the Denmark engineers checked first was the drawer pulse: the WF-P3399 fired the cash drawer on the RJ11 header across a thousand cycles without a miss. The WF-P3399 POS Android motherboard order for Copenhagen, Denmark cleared the burn-in station on schedule and is en route via the Copenhagen - Shanghai lane.
The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Denmark integrators, the Energistyrelsen conformity plus CE marking with the Danish Energy Agency radio notification paperwork is bundled.
Filed by Man Qing, AndroidSBC field desk, YANTIAN. Denmark integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3399 Application Scenarios
The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Copenhagen.
- Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Copenhagen: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Copenhagen Buyers
AndroidSBC runs three commercial tracks on the WF-P family, and Copenhagen partners usually start on one and move to another as volume builds.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
The Copenhagen partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?
Answer: Supported. dual-screen high definition POS with 4K promotion wall is part of the standard WF-P configuration set, and the board ships to Copenhagen with the drivers and the firmware baseline already matched.
Which silicon tiers are available in the WF-P family for Denmark buyers?
Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3399 board in this configuration is supported for seven years from release.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.
What is the minimum order quantity and the sample lead time for Denmark?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.
How are firmware updates delivered to a Denmark estate after deployment?
Answer: Staged OTA with rollback ships with the board. The Denmark partner controls the wave size and the timing, and the watchdog recovers a lane that fails mid-update.
What shipping terms does AndroidSBC support for Denmark orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Copenhagen partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Denmark?
Answer: Every unit is serialised against its test record. A Denmark field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen BOM.
Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Copenhagen integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Copenhagen and Denmark buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.
